The brotherhood of the UDS

[BrewGUN]

Mine was free. You're getting screwed

I can have as many as I want free, that's what we sell them to the outsiders for

ok dammit ya got me!

no, he didn't, red never let crut think he's won, his melon is big enough all full of mush...

At least my head is proportionate to my body;)

[jehler]

Ahh....you want me to post a pic???

[jehler]

Napoleon

[Blast & Cast]

We get ride of 20-30 bbls with lids every couple weeks for $5 a bbl. you guys are getting screwed

I used to get for free all the barrels I wanted. They held peanut oil. The oil was actually in a plastic liner, like a big garbage bag, so when you pulled the liner out they were clean. We used them for feeders because the varmints would chew through the plastic barrels. I just left a message for my contact to see if I could get some.

[Feelin' Fowl]

Not quite a UDS, but this little guy smoked some ribs for me...

uploadfromtaptalk1370392427219.jpg

I think this is where something clever about tapatalk should go.

[Olly]

Not quite a UDS, but this little guy smoked some ribs for me...

uploadfromtaptalk1370392427219.jpg

I think this is where something clever about tapatalk should go.

Looks so good.

[BrewGUN]

We get ride of 20-30 bbls with lids every couple weeks for $5 a bbl. you guys are getting screwed

I used to get for free all the barrels I wanted. They held peanut oil. The oil was actually in a plastic liner, like a big garbage bag, so when you pulled the liner out they were clean. We used them for feeders because the varmints would chew through the plastic barrels. I just left a message for my contact to see if I could get some.

Thats what these are, they have fruit puree inside double bags, pull the bags out and bam, clean bbl. I can get the plastic ones too, those work good for spearing carp, rain barrels, or just garage/barn trash cans.

[assateague]

Speaking of rain barrels, I need to pick up a couple more. Hurricane season will soon be upon us, and I've only got 160 gallons right now. My family will go through that in 3 days of a power outage flushing the damn toilet.

[Flightstopper]

Speaking of rain barrels, I need to pick up a couple more. Hurricane season will soon be upon us, and I've only got 160 gallons right now. My family will go through that in 3 days of a power outage flushing the damn toilet.

You should back tax the state by the ounce for saving the water from polluting the ocean.

[assateague]

That is an excellent idea. At the very least, I would get enjoyment from sending them a bill, for someone to briefly ponder over before throwing in the trash.

[jarbo03]

That is an excellent idea. At the very least, I would get enjoyment from sending them a bill, for someone to briefly ponder over before throwing in the trash.

They would tax you for the time they spent looking at and disposing of the bill you sent them.

Sent from my SPH-D710 using Tapatalk 4 Beta

[Flightstopper]

That is an excellent idea. At the very least, I would get enjoyment from sending them a bill, for someone to briefly ponder over before throwing in the trash.

That kind of common sense couldn't go over well with them.

[3legged_lab]

You should get a tax credit at the very least.

[Willie]

Speaking of rain barrels, I need to pick up a couple more. Hurricane season will soon be upon us, and I've only got 160 gallons right now. My family will go through that in 3 days of a power outage flushing the damn toilet.

It's here already. Andrea will be on her way in a couple days.

[grizz18]

Speaking of rain barrels, I need to pick up a couple more. Hurricane season will soon be upon us, and I've only got 160 gallons right now. My family will go through that in 3 days of a power outage flushing the damn toilet.

It's here already. Andrea will be on her way in a couple days.

Should be Saturday for Assa. Sussposed to get the rain tonight and tomorrow...

[assateague]

Yep, supposed to come in late Friday night into Sat morning. Not much bad, just enough to fuck up a weekend.

[grizz18]

I'm starting my hunt for parts on the UDS this weekend/next week. Might be a couple weeks before I get it done..but I'm def doing. Watched 2 hrs worth of youtube yesterday ensuring I would be doing it right.

[assateague]

The biggest time saver for me would've been having access to a step bit. Not having one easily added an hour and much aggravation.

[grizz18]

The biggest time saver for me would've been having access to a step bit. Not having one easily added an hour and much aggravation.

I'm thinking about burning it out, and seeing what how much sand/soda blasting would be.

[Redbeard]

Can we please not trash the UDS thread with non UDS non sense

[assateague]

The biggest time saver for me would've been having access to a step bit. Not having one easily added an hour and much aggravation.

I'm thinking about burning it out, and seeing what how much sand/soda blasting would be.

I was talking about a step bit for the 1" holes at the bottom. And I'm sure the $7 I spent on flat black paint was cheaper for the outside.

[Willie]

Can we please not trash the UDS thread with non UDS non sense

What fun would that be?

[grizz18]

The biggest time saver for me would've been having access to a step bit. Not having one easily added an hour and much aggravation.

I'm thinking about burning it out, and seeing what how much sand/soda blasting would be.

I was talking about a step bit for the 1" holes at the bottom. And I'm sure the $7 I spent on flat black paint was cheaper for the outside.

Ohhh. Would a metal bit not do the job?

[assateague]

It would if you can find a 1" metal bit. I've never seen one, and I suspect if I did, it'd be more expensive than the step bit. I used a jigsaw, and threaded the nipples in, then sealed the gap with JB Weld (which added about $6 to the cost). I have a couple electrician buddies I could have borrowed one from, but that would have meant waiting through the weekend, and I wanted it done now.

[grizz18]

It would if you can find a 1" metal bit. I've never seen one, and I suspect if I did, it'd be more expensive than the step bit. I used a jigsaw, and threaded the nipples in, then sealed the gap with JB Weld (which added about $6 to the cost). I have a couple electrician buddies I could have borrowed one from, but that would have meant waiting through the weekend, and I wanted it done now.

Gotcha. I'll have to study the hardware a little more, I'm not familiar with most of it.

The nipples (3/4 right). Is there not a conduit nut or something that could go on the inside (of the barrel) and outside to keep it straight? I want to trick it out a little and add the black pipe on each that come straight up the drum with valves on top.

I've never seen those pipes anywhere, how do you get the length you want and have it threaded on each end?

[assateague]

They have it at HD, or you can buy a piece, and they'll cut it to length and thread it right there. And yes, you could put a conduit nut on the inside- I think. I'm pretty sure that the black pipe thread is the same as conduit. And yes, the nipples are 3/4", but the hole will need to be about 15/16 to get it to thread in. Really, you only need one coming up. I keep the caps off of the other two for only about 2 minutes, if that. It heats up QUICK when you put the fire basket in, and I've only needed to control the air from the one valve. The other two nipples just stay capped the whole time.

[DeadEye_Dan]

Find an old timey hardware store have it cut to length and threaded.

[Redbeard]

It would if you can find a 1" metal bit. I've never seen one, and I suspect if I did, it'd be more expensive than the step bit. I used a jigsaw, and threaded the nipples in, then sealed the gap with JB Weld (which added about $6 to the cost). I have a couple electrician buddies I could have borrowed one from, but that would have meant waiting through the weekend, and I wanted it done now.

Gotcha. I'll have to study the hardware a little more, I'm not familiar with most of it.

The nipples (3/4 right). Is there not a conduit nut or something that could go on the inside (of the barrel) and outside to keep it straight? I want to trick it out a little and add the black pipe on each that come straight up the drum with valves on top.

I've never seen those pipes anywhere, how do you get the length you want and have it threaded on each end?

pipe threader

[aunt betty]

Not quite a UDS, but this little guy smoked some ribs for me...

uploadfromtaptalk1370392427219.jpg

I think this is where something clever about tapatalk should go.

Try this FF.
Put coals in bottom. Make circle with no coals in center
Put the grill on top of the coals way down inside. Do beercan chicken. Takes 60-90 minutes. The skin will burn. Its ok.
Tasty-juicy. That brinkmann is perfect for doing this. I used to have the same smoker.

[Feelin' Fowl]

Not quite a UDS, but this little guy smoked some ribs for me...

uploadfromtaptalk1370392427219.jpg

I think this is where something clever about tapatalk should go.

Try this FF.
Put coals in bottom. Make circle with no coals in center
Put the grill on top of the coals way down inside. Do beercan chicken. Takes 60-90 minutes. The skin will burn. Its ok.
Tasty-juicy. That brinkmann is perfect for doing this. I used to have the same smoker.

That its now officially on the list of things to try. Thanks!

I think this is where something clever about tapatalk should go.