Latest Purchase Thread

[Bootlipkiller]

ImageUploadedByTapatalk1381623324.776177.jpg

ImageUploadedByTapatalk1381623350.726927.jpg

$60 speck full body's and a few more boxes of Kent's added to the ammo cabinet.


Sent from an undisclosed location on the river

HAHA! Pegged you for a Black Cloud shooter!

Those are my snow and speck shells. Hate that stuff for ducks.


Sent from an undisclosed location on the river

But...the duck commanders shoot it...must be the best for ducks.0

Sent from an undisclosed location on the river

[(MT)Montanafowler]

hey John, just wanted to remind you...

9 days, 12 hours, 37 minutes and 11 seconds

i'm going with 17 days, mid morning. COD: Baptism via gopro

Here ya go.

Oct. 20th, at 930 am...

[jarbo03]

Here ya go MT.



Sent from my SPH-D710 using Tapatalk

[jarbo03]

uploadfromtaptalk1381677017799.jpg

Sent from my SPH-D710 using Tapatalk

[The Duck Hammer]

Lol


Sent from my Vox Mortem

[huntall6]

Picked up a rock river elite operator brand new for $850! Can't wait to pick it up!

[(MT)Montanafowler]

Picked up a rock river elite operator brand new for $850! Can't wait to pick it up!

damn, that's a steal! congrats man

[jarbo03]

Picked up a rock river elite operator brand new for $850! Can't wait to pick it up!

Very nice!

[3legged_lab]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

[(MT)Montanafowler]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

fuck, that reminds me i'm due for all that shit too.

[huntall6]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

I just did ball joints on mine in the driveway for under 150...

When it was said and done, I wish I would have taken it in. That is a mother fucker on my year if truck!

[Bootlipkiller]

New exhaust manifolds, plugs, and plug wires, for the Red Dawn duck truck $400.00.


Sent from an undisclosed location on the river

[3legged_lab]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

I just did ball joints on mine in the driveway for under 150...

When it was said and done, I wish I would have taken it in. That is a mother fucker on my year if truck!

Certain jobs I have no problem doing myself, others are entirely worth paying for.

[Eric Haynes]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

Is it a Dodge?

[3legged_lab]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

Is it a Dodge?

F-350

[Eric Haynes]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

Is it a Dodge?

F-350

My Dodge diesel seems to have more expensive parts than most vehicles on it for some reason. Wheel bearing were $385 a piece for it.

[Bootlipkiller]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

I just did ball joints on mine in the driveway for under 150...

When it was said and done, I wish I would have taken it in. That is a mother fucker on my year if truck!

Certain jobs I have no problem doing myself, others are entirely worth paying for.

Especially when you break a bolt off in the engine block.


Sent from an undisclosed location on the river

[3legged_lab]

Had an appt today to check the alignment on my diesel, it felt like it was wandering some while towing the boat last week. Turns out I needed a new ball joint, new tie rods, D bushings and the alignment - $860. Also one of my locking hubs is tough to turn so I'm gonna replace both of those with the good all metal ones, another 300 bucks.

I just did ball joints on mine in the driveway for under 150...

When it was said and done, I wish I would have taken it in. That is a mother fucker on my year if truck!

Certain jobs I have no problem doing myself, others are entirely worth paying for.

Especially when you break a bolt off in the engine block.


Sent from an undisclosed location on the river

Or when an alignment is required after the repair is made.

[3legged_lab]

I know jim would align it with a tape measure, a carpenters square, and a bench rule.

Or use a piece of string in place of the bench rule if its not available.

[Bootlipkiller]

I know jim would align it with a tape measure, a carpenters square, and a bench rule.

Or use a piece of string in place of the bench rule if its not available.

Sent from an undisclosed location on the river

[GadwallGetter530]

I will be purchasing my season pass tomorrow.

[Bootlipkiller]

I will be purchasing my season pass tomorrow.

Where did one of your 12 relatives draw for the opener?


Sent from an undisclosed location on the river

[GadwallGetter530]

I will be purchasing my season pass tomorrow.

Where did one of your 12 relatives draw for the opener?


Sent from an undisclosed location on the river

NOT A FUCKING ONE!!!!!! I'll be one of the jack wagons chillin at the lodge on Thursday.

[3legged_lab]

I will be purchasing my season pass tomorrow.

Season pass to the closed refuges?

[Bootlipkiller]

I will be purchasing my season pass tomorrow.

Where did one of your 12 relatives draw for the opener?


Sent from an undisclosed location on the river

NOT A FUCKING ONE!!!!!! I'll be one of the jack wagons chillin at the lodge on Thursday.

Well take pictures I hear cupped addiction will be there! also heard the line started Saturday out there.


Sent from an undisclosed location on the river

[GadwallGetter530]

I will be purchasing my season pass tomorrow.

Season pass to the closed refuges?

Yes... Yes I am. It's a horrible cycle.

[GadwallGetter530]

I will be purchasing my season pass tomorrow.

Where did one of your 12 relatives draw for the opener?


Sent from an undisclosed location on the river

NOT A FUCKING ONE!!!!!! I'll be one of the jack wagons chillin at the lodge on Thursday.

Well take pictures I hear cupped addiction will be there! also heard the line started Saturday out there.


Sent from an undisclosed location on the river

Two guys in line as we speak.

[Bootlipkiller]

I will be purchasing my season pass tomorrow.

Where did one of your 12 relatives draw for the opener?


Sent from an undisclosed location on the river

NOT A FUCKING ONE!!!!!! I'll be one of the jack wagons chillin at the lodge on Thursday.

Well take pictures I hear cupped addiction will be there! also heard the line started Saturday out there.


Sent from an undisclosed location on the river

Two guys in line as we speak.

That's it! I was told it was worse then that! The inuit brothers?


Sent from an undisclosed location on the river

[GadwallGetter530]

That's it! I was told it was worse then that! The inuit brothers?


Sent from an undisclosed location on the river

My inside sources say no. I'll be playing the lotto at a couple places and getting a sweatline number at the lodge. If I get in by noon it would be cool with me. I told Dave the worst case scenario we will be deer hunting instead.

[Bootlipkiller]

That's it! I was told it was worse then that! The inuit brothers?


Sent from an undisclosed location on the river

My inside sources say no. I'll be playing the lotto at a couple places and getting a sweatline number at the lodge. If I get in by noon it would be cool with me. I told Dave the worst case scenario we will be deer hunting instead.

You're so positive!


Sent from an undisclosed location on the river